Operation Points Of Reach Stacker Drop Box
Reach stacker is mainly used for container stacking and horizontal transportation in terminals and yards. Compared with forklifts, it has the characteristics of mobility, flexibility, easy operation, stability, low wheel pressure, high stacking layers and high yard utilization. Because the container is large as a whole, it is easy to obscure the operator’s matters. Therefore, for safety reasons, the operator should pay attention to some points when using the reach stacker to drop the container. Let’s take a look below.
1. Counterpoint drop box. After driving to the designated cargo space or the vehicle to be loaded, aim at the designated cargo space or the vehicle to be loaded, and after reaching the reach stacker to a complete stop, adjust the position and angle of the container under the command of the lifting signal, and lower the hanger .
2. Lift the spreader. After the containers are stacked firmly, press the “twist lock” button to release the winch, the green signal light on the control panel will go out and remove it. After checking that the winch is in the unlocked state, hoist it to an appropriate position, look out, flute, and move back to the next working cycle. When using a reach stacker, you must first ensure safety and use it in accordance with operating procedures to ensure the safety of the container, reach stacker and personnel.